Showing posts with label flashing. Show all posts
Showing posts with label flashing. Show all posts

Wednesday, May 02, 2007

Little Details

After we finished the roof, Allen made these little copper caps for all the brackets that hold up the verge rafters on the gables. This way water won't sit on top of the wood and soak in. I need to start painting/staining soon but I am still wrestling with colors and just have not had time to start anyway. This wood really needs something on it though. This copper is very old, that is why it doesn't look all shiny. It's actually some scrap copper I had that I salvaged from the Big House when they tore off the roof flashing in the valleys. I hope it does not curse my house! These caps are glued on with some roofing caulk.
I hope to have photos of the sheetrock we hung up soon and some other stuff we have done. It's starting to look different on the inside. I still can't pick out my bathroom tile! I don't know why I am having such trouble with this. Too many options.
I am trying to start something of a garden also but I don't know how that's going to work. If I don't fence it, it will get eaten by the critters again and I don't know when I'll have time to put up a good fence. There are just not enough hours in the day. We are still working some 10's, so I don't have a lot of time in the afternoons to work on the house much.
My septic system installation has been put off until the end of next week, darn it. Got to get water soon. I will try to post again soon.

Saturday, April 28, 2007

Back Up On The Roof

The roof is done!! We finally got through the bad weather and got all the ladders and pick boards freed up and everything set back up outside and finished the roof and all the trim and flashing. What a pain in the butt. Early when we started back on it, the pollen had just started to fall in a big way and that roof was slicker than owl grease. It was very difficult to get around on but it rained the other day (yea!) and washed all that off so working today was fine. You may not see much difference in the roof but all that right on the edge has previously not been there. It was just this ragged looking edge for a long time.
This is a close-up shot of the trim that goes on the gable ends. Allen had this made special because the standard pieces they gave us were a lot bigger and really looked goofy. They stuck further out and we wanted something that had a more streamlined look. It's still kinda big but it looks good in place. You can see, it caps over that last rib on the decking and is screwed tight against the verge rafter.

The trim is run on the sides and then the ridge cap is installed over them. It makes a nice smooth look there. You can cut the ridge cap off wherever you want and we thought it looked better sticking out past the trim about a half inch. This is the little tiny short piece over on the east side of the house. This little area will eventually disappear and be integrated into the rest of the roof when the other half of the house is built.


This is the flashing under the clerestory windows. All of this is fairly easy to install; not rocket science. Flashing under shingle roofs always seems more complicated to me. But this is a pretty simple roof; no valleys or other weird stuff. Well, the clerestory section is a little weird but not too much. You just have to make sure on your flashing that everything is layered. Note the flashing up under the Tyvek and the siding will, of course, extend down over all of this to that inside corner in the flashing.
We also hung some more Sheetrock today and did some cleanup. I'm glad the roof is over because it takes so long moving all that scaffolding etc. around. I think that part of getting set up took almost half of the time. Well, any high work on this house takes a long time to set up for. The siding will be the same way and painting.
One other thing about this roof, it is MUCH cooler to work on than a standard shingle roof so I think it is really doing it's job of reflecting heat. Now, granted, it's not August but you could place your bare hands on the metal with no problem and I know of times that I have actually blistered my butt sitting (with blue jeans on) on a shingle roof in the springtime.