Showing posts with label tools. Show all posts
Showing posts with label tools. Show all posts

Friday, January 17, 2014

Big Iron



     Aha!!  I bet by now, you all had even forgotten about the "word" posts that I was supposed to be doing!  Uh-huh.  Well, that's okay.  I'll let it slide this time.  I can't blame you because I have been a terrible slacker.  But, I keep the list on my desk so I will get to them all at some point.  Well, anyway....the next word on the list is podger!!  And I would imagine that most of you, like myself, are like, Huh??  What the hell is that?  Leave it up to some smarty pants construction people to come up with something like that...heehee.  The tool of course, I knew, just not by that name.  Down here, we call this a spud wrench.  Podgers, or spud wrenches, are generally carried by ironworkers and used to help erect "red iron".  This is the term we use for the structural steel framework of a building that is usually coated with a red primer, although many times they will use grey.  Red iron just sounds better.  Red iron is welded in places but initially they bolt it together as the crane lifts each piece into place.  As you might can imagine, a 30 foot I-beam swinging from a crane is not incredibly easy to control by a person standing only on an 8 inch wide beam 60 feet in the air.  Suspended in such a manner, the beam actually swings quite easily, but getting the bolt holes to line up just right is time consuming and a good way to mash your fingers off (literally), thus the pointed end on this tool.  It's easy to ram that end through the misaligned holes, as long as they are somewhat together, and as the pointed end is pushed through, it draws the holes in line.  The bolts can then be placed in the other, now aligned holes, the podger removed and that hole bolted.  It's also a great pry bar.  A coordinated ironworker can move pretty fast with one of these.  This particular spud wrench is fairly large (for me) at about 20 inches and it has, as you can see, a fixed open end.  Many spud wrenches are adjustable just like a large Cresent wrench.  I honestly have no idea where I got this one and have rarely used it.  Tools like this were usually supplied to us on the job and as I was not a full-fledged, regular ironworker I did not keep my own.  Allen has an adjustable one that we use more often, as you might imagine.  So, there is your lesson for the day.  Haha!


     I haven't told ya'll a funny work story in some time so I thought this one kinda went with the post.  I don't think I've told this one but if I have just pretend you've never heard it.  In my construction career, I actually worked more as a carpenter probably but did do a fair amount of steel work on our jobs and the last job I did was solely as a welder.  I did hang a little "red iron" but mostly I was there to weld up the structural steel that held pre-cast concrete and stone panels.  As you might also imagine, this is some pretty hefty steel to be able to hold that much
weight.  The steel is also not bolted up but welded directly to steel plates embedded in the underside and edges of the concrete floor slabs.  The vertical pieces were only about 3-4 feet long, and I could handle those myself but the horizontals were very heavy and they would set those for me with a machine.  Well, this was a crap job.  I was supposed to have another welder helping me but that boy never could get his act together and ending up leaving because of an off the job injury.  Even with another welder there was no way I could hang all that steel by myself (also the elevators, handrails and much other misc.) in the time frame they wanted.  I was somewhat flattered in their confidence, or whatever, but no way, no how.  So, they ended up hiring a steel subcontractor to come in and help.  I had the pre-cast on the back of the building and this group of 5 men had the steel on the front.  To be fair, they did have more to hang than me. ha!  Now, for near 20 years, through chance or design, I had worked a great deal by myself.  When I truly needed help I could get it; I never moved a piece a steel that was too much, but if I could handle it myself I preferred it that way.  And, when you work by yourself (whether you're a man or woman), you learn how to move things and hold stuff the smart way because it's not physically possible to manhandle it.  The high art of wedging, cantilevering, prying and clamping come in handy.  So.  I was chugging along the back, hanging my steel like all get out.  I would put a heavy board across the handrails of my lift bucket and then wedge the vertical piece of steel between that board and the embed it welded to.  I had my layout marked on the embeds already so I just tapped the steel with a hammer to get it on spot and to plumb it up.  Magnetic levels are very handy too!  I'd tack that off and then move back, clamp the diagonal brace off to my first piece and just hold the other end until I tacked it.  Easy Peasy.  Double check my plumb and then hard weld everything.  I only needed help after I got all my vertical/ diagonals hung and one of the guys would hold the 30 foot or so horizontal angle up to them with a Lull.  I'd tack weld it on grade, he leave and then I'd finish.  Piece of cake.  So, the new steel crew came out and started on the front.  And this was no rookie crew.  You could tell by looking at them they were seasoned ironworkers.  Well, their first day I came through the building for lunch and I noticed that 3 of those men were crammed into the basket of one man-lift.  Now, that is highly illegal in OSHA's book and our foreman over the steel had a fit when he saw them.  "What in the world are ya'll doing??  Why do you need 3 men in that one spot??"  They stomped and fussed.  "Well, what do you expect??  Got to have one to hold, one to plumb it and one to weld!!!"  Now, Nick, one of our younger foreman at the time, usually goes into a battle of wits unarmed, but the construction gods were kind to him on that day.  An evil, joyous smile quickly spread over his face.   "Well, I'll tell ya'll what..." Nick drawled, barely able to control his glee but trying to feign a serious air. "I got a woman welder around back that's hanging all her steel by herself....I'll go get her to show ya'll how to do it."  Nick said a look of sheer horror came over that steel foreman.  "Hell no! No, no, no!!  Naw, we can figure it out!!  Nick insisted it would be no trouble, that I was a very nice lady and don'tcha know she won't mind a bit but they would have none of it.  Haha!  Imagine that.  I was in the trailer eating lunch with the other guys when Nick came running in to relay the story.  He was laughing so hard we almost couldn't understand him but eventually we all got a huge kick out of that.  He told me later that day he saw two of the welders peeking around the corner of the building to see just how I was doing it on my own.  Of course, every time I passed them after that I made sure to smile big and wave.

Sunday, May 16, 2010

Little Things

Yeah, I know, it doesn't look like much but this was something of a pain to do, so I was pleased that I did finish this side yesterday. It wasn't as bad as I had imagined, I only cut one board wrong, but trying to hold myself on that slick roof and it being so near the edge and nail that stuff off etc. was kinda tricky. But it's done! Yea!
I did also manage to scrounge up a little more trim so I have all four of the sills and under pieces on all the windows and the corner boards up. Now, I just need to get a little more to do the sides and header pieces. If the rain holds off I am going to try to start running the siding across the front maybe. But I also need to mow the yard; it's getting a little high even for me. And I wanted to get the Bobcat in the garden and do a little leveling and clearing for path preparation. I also have some squash and pepper plants that need setting out and some cantaloupe. Oh!! I almost forgot to tell ya'll... the other day I went by the local lumber/ garden center to buy some bags of soil amendments. Hey, don't scoff! My soil is so bad and I need it fixed faster than I can produce compost, with just me and no animals, so I buy some bagged soil to mix in. Anyway, one bag was unusually heavy, even for me, and as I was loading it into my truck, an older man came up and said "may I help you with that?" And I let him!! Uh-huh, how 'bout that? Maybe I can be salvaged.

The other day FloridaCracker asked me about my new little toy here and I had meant to show it anyway. I bought this little Troy Built cultivator a few weeks ago and so far I like it pretty good. Now, as I had told FC, I had tilled my garden for the past 3 years with a Troy Built Horse; one of those big rear-tine tillers, so the soil was pretty loose anyways. That and it being mostly sand makes it easy to dig. I just needed something at this point to dig a little and mix in compost and amendments and for that I think it does pretty good. It digs like hell and isn't stopped by rocks but if you were breaking new soil I don't believe this would be the thing. One other thing is that it doesn't move forward very well, it just digs itself down in a hole. I find that the best way to go and have it dig deep is to back up with it. It's pretty easy to start and you can buy an electric, push button start for it if you want. It also comes with edger attachments.

Alright, time to get to work. It is so lovely and cool here today. We have actually had a spring this year! It's amazing. Seems the past several years we just go straight from winter to summer, with spring lasting maybe a week! I haven't even used air-conditioning yet but that may change soon. Ya'll have a good weekend; what's left of it!


*Good Charlotte

Monday, April 03, 2006

Come Rain Or Come Shine

Since it had rained Friday night and early Saturday morning, we had to wait until early Saturday afternoon before we could start putting the sub floor down for fear that the dampness in the lumber would cause the glue not to hold. We got rolling pretty good but about 4:30 in the afternoon, here it came again! It rained just enough to soak the joists and so we just quit and thought we would hit it hard on Sunday.
We got started good on Sunday and the weather was great! About noon we discovered a slight error in our joist layout and so it took us about a half hour to fix that and resume the plywood. Allen is probably going to be pissed that I mentioned that but it wasn't a big deal and everybody can make a mistake, even those of us who do this for a living. We always say at work that a good carpenter isn't one who never makes a mistake but one who can fix his mistakes. 'Cause if you're working, you're going to make one every now and again. Speaking of mistakes, I just remembered one I made Saturday. The figures I gave on the cost per square foot for the foundation and floor did not include the price of the steel posts! DUH! So with that added in, it bring the cost up to $4.80/sq.ft. If I had tried hard enough I think I could have gotten that steel really cheap or free. I'm sure one of the scrap yards would have had it.
We were determined to get all the plywood down so that next weekend we can be framing the walls. Thank God for nail guns! It saves your elbow but my wrist and hand are very sore today. And my back and about everything else! I've been off of this kind of work for too long. Things went good the rest of the day but we still had to work about the last 30 minutes by lantern light. We got it all down though. It's funny how when you are working, it doesn't seem that hard on you but when you get up to the house and start undressing to take a shower, you feel like all your joints have set up. We were both walking around like 80 year olds! All of the pics were taken on Sat. I wanted some of the completed floor but we didn't really have time to take any photos later and then it was dark. Well, a plywood floor is not all that exciting anyway. I also discovered upon stuying the drawings more, that the kitchen is way too narrow as drawn. So, we are going to have to open that up some which is going to push the clerestory windows back toward the midline of the house, which is not a bad thing but something we must work out. But then you have to see what that's going to do to the roof line etc. That can wait a little though because this week I must get window sizes and locations finalized.

Friday, February 17, 2006

Beast of Burden

This is why he is called "Oliver". I know, that's not very original on our part! He is also a '52 model not a '51 as I had previously stated. I didn't think I was right.
This post is for Allen! this is his pride and joy...Oliver. He is a 1951 model I think. He works very hard but he has had a little trouble with all of the rocks in these parts. He broke a tooth on his box blade and tore holes in another box blade. (yes, I'm almost finished repairing that, David) He has even gotten stuck a couple of times but nothing too bad.